View previous topic :: View next topic |
Author |
Message |
TonyH
Joined: 16 Feb 2010 Posts: 4
|
Posted: Tue Feb 16, 2010 5:53 pm Post subject: Combine F2 and Down |
|
|
I am trying to build a dataloader to complete some shipping transactions.
I need to switch tabs from Lines to Deliveries to complete the shipment.
Using Keystrokes I can emmulate this with F2 (shortcut to List Tab Pages) and Down Arrow followed by Enter.
In Dataload though I am having issues:
\{F2} temporarily displays the list but this closes before the Dwon is activated.
I have tried:
\{F2}{DOWN}
\{F2}+{DOWN}
\{F2DOWN}
All so far to no avail and a google search hasn't really helped me either.
Any suggestions?
Thanks Tony |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
DataLoad Site Admin
Joined: 15 Nov 2005 Posts: 231 Location: Dorset, UK
|
Posted: Tue Feb 16, 2010 6:06 pm Post subject: |
|
|
Tony,
Using something like the following should work to open the Tab list and move down by one item:
\{F2}{DOWN}
The {F2} part causes F2 to be pressed and released but the tab list should remain visible when F2 is released. We have tested this in our R12.1 instance and that is the behaviour we are seeing.
If you are working directly in the form, i.e. not through DataLoad, then do you need to keep F2 depressed to keep the tab list visible or does it stay visible when you release F2? And is the behaviour different when you press the F2 key through DataLoad?
Thanks,
Jonathan Stuart |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
TonyH
Joined: 16 Feb 2010 Posts: 4
|
Posted: Tue Feb 16, 2010 6:09 pm Post subject: |
|
|
Jonathan,
Thanks for the swift response.
In the live form I don't need to hold down the F2 key, and the list stays open for me.
Via the Dataload though it pops up the list and closes it again before any other keystroke is registered.
I have also tried tabbing through the form to get to the delivery tab but this just moves to the next line, even if the line is blank.
Any other thoughts?
Tony |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
DataLoad Site Admin
Joined: 15 Nov 2005 Posts: 231 Location: Dorset, UK
|
Posted: Tue Feb 16, 2010 6:13 pm Post subject: |
|
|
Tony,
What version of DataLoad are you using? Also, what is your Oracle version?
Thanks,
Jonathan |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
TonyH
Joined: 16 Feb 2010 Posts: 4
|
Posted: Tue Feb 16, 2010 6:23 pm Post subject: |
|
|
Oracle is 11.5
Dataload is 5.0.0.0
Thanks |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
DataLoad Site Admin
Joined: 15 Nov 2005 Posts: 231 Location: Dorset, UK
|
Posted: Tue Feb 16, 2010 6:40 pm Post subject: |
|
|
Tony,
I have tried this on our 11.5.10.2 instance with DataLoad V5.0 and couldn't reproduce the problem. I used the following in a DataLoad cell to open the Tab list and select the third item:
\{F2}{DOWN 2}{ENTER}
The Tab list is staying open after F2 is pressed so I am struggling to know what to suggest.
Can you email me your load file so I can look at that? Please email it so support@dataload.com.
Thanks,
Jonathan |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
TonyH
Joined: 16 Feb 2010 Posts: 4
|
Posted: Wed Feb 17, 2010 10:36 am Post subject: |
|
|
Jonathan,
Thanks so much, that's sorted it.
The full code was:
\%V%F
\+{TAB}
3176141
TAB
3176141
ENT
\{F2}{DOWN}{ENTER}
*AS
ENT
ENT
Adding the {ENTER} was the key to it
For the record this was to dataload ship confirm and having queried the record (by order number) switch to the delivery tab and confirm the shipment.
Hopefully that might help someone else in the future.
Thanks again and regards
Tony |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
DataLoad Site Admin
Joined: 15 Nov 2005 Posts: 231 Location: Dorset, UK
|
Posted: Wed Feb 17, 2010 10:39 am Post subject: |
|
|
Tony,
No problem, good to hear you got this working.
Thanks,
Jonathan |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|